Below is a list of general papers on infrared technology as well as articles on topics that SBIR has presented over the years at the annual SPIE Defense & Security Symposium. Please keep in mind that these papers were written at a specific point in time and are thus not a direct reflection of the current status of a program/product or test application.
SPIE Standard Products Publications
Rapid Electro-Optical (EO) TPS Development In A Military Environment 2012 (PDF)
This paper provides a discussion on the numerous advantages of utilizing IRWindows as an Electro-Optical test development and execution environment for TPS development over ATLAS.
Calibration of a High Dynamic Range Low Light Level Visible Source 2011 (PDF)
This paper provides a discussion on a method to calibrate image intensified (I-squared) devices over a large dynamic range while considering output compensation methods.
Non-Optically Combined Multi-Spectral Source for IR, Visible and Laser Testing 2010 (PDF)
This paper provides a discussion on a multi-spectral source provided by SBIR, including performance data relating to EO testing with output in pertinent spectral bands, stability and resolution.
Comparison of Fourier Transform Methods for Calculating MTF 2008 (PDF)
This paper provides a comparison of varying methods to calculate MTF testing.
Radiometric Calibration and Operation of IR Target Projectors 2006 (PDF)
This paper provides a procedure for radiometric calibration of infrared target projectors using the RAD-9000 MWIR/LWIR spectral radiometer.
Bolometers Running Backward: The Synergy Between Uncooled IR Sensors and Dynamic IR Scene Projection 2006 (PDF)
This paper presents a lighthearted overview of the technical evolution of IRSP from its early microbolometer roots, discusses current and emerging IRSP capabilities, illustrates the device-level to system-level synergy between sensors and projectors, and offers a peek into the advanced EO simulation capabilities and technologies which will be required to address emerging FPA and sensor trends.
Advanced Man-Portable Test Systems 2005 (PDF)
Discussion of SBIR's latest developments in instrumentation for military laser range finder/designator test and evaluation.
Advanced Test Systems for Production Testing of Cameras with Day/Night and Visible/NIR Capabilities 2005 (PDF)
Discussion of SBIR's new variable contrast test system for evaluating camera day/night mode performance.
RAD9000: A High-Performance Spectral Radiometer 2005 (PDF)
Provides an update on the RAD9000 MWIR/LWIR spectral radiometer- a high performance instrument supporting extremely accurate absolute and relative radiometric calibration of EO test systems.
Advanced Target Projector Technologies 2005 (PDF)
Discussion of SBIR's recent developments in the area of target projection technologies for measurement of staring IR sensor image quality.
Reflective/Emissive Target Comparison 2003 (PDF)
Discussion of SBIR's in-house target projector system, and review of preliminary results showing advantages of reflective vs. emissive targets.
High Temperature Emitter Physics 2003 (PDF)
Introduction of long-term technical approaches for achieving >2000 K apparent temperature using resistive emitter-based IR scene projection.
Laser Testing 2003 (PDF)
Introduction of SBIR's new family of test modules supporting characterization of UUT laser range finders, designators, and spot trackers.
High-End Infrared Imaging Sensor Evaluation System 2002 (PDF)
Discussion of IR Testing Using IRWindows™2001 (PDF)
A Turnkey Test System for IR Imaging
(from Photonics Tech Brief, May 1999)
High-Performance FLIR Testing Using Reflective-Target Technology 1999 (PDF)
MIRAGE Dynamic IR Scene Projector Publications
A Hybrid Approach to Non-Uniformity Correction of Large Format Emitter Arrays 2012 (PDF)
This paper discusses a hybrid method to performing a non-uniformity correction on an infrared scene simulator using both a flood measurement and a sparse grid method.
Design Considerations for a High-Temperature, High-Dynamic Range IRSP 2012 (PDF)
This paper reports the results of some initial investigations into the resolution that is required for acceptalbe system performance and the effects of moving to a higher dynamic range may put on existing NUC procedures of a high dynamic range infrared scene projector.
Radical Rise Time Enhancement of a Resistive IRSP Array 2012 (PDF)
This paper expands on a study previously conducted by
SBIR to determine the maximum capability of a technique in which the pixel drive of the first frame of a commanded
transition is modified to improve transition time in order to support up to 400 hertz frame rates.
Ultra High Temperature Infrared Scene Projector System Development 2012 (PDF)
This paper discusses the current status of the
pixel design of the UHT development program and will discus with an emphasis on the models developed to facilitate these designs and estimate
performance prior to fabrication.
Enhanced LWIR NUC Using an Uncooled Microbolometer Camera 2011 (PDF)
This paper discusses an alternative approach to utilizing either a cooled MWIR or LWIR camera with a microbolometer camera to perform LWIR Non-Uniformity Correction on an Infrared Scene Projector.
LWIR NUC Using an Uncooled Microbolometer Camera 2010 (PDF)
An overview of the continuing development by SBIR to use a microbolometer camera to perform LWIR NUC on an Infrared Scene Projector (IRSP).
Rise-Time Enhancement Techniques for Resistive Array Infrared Scene Projectors 2009 (PDF)
An overview of SBIR's new rise-time technique termed "overdrive" used for improving the rise-time of emitter pixels.
Performance Improvements in Large Format Resistive Array (LFRA) InfraRed Scene Projectors 2008 (PDF)
This paper will discuss the advances in pixel design, rise time enhancement techniques and also the process by which arrays are annealed.
LFRA: Developments in Large-Format Resistive Arrays & Advanced IRSP System Technologies 2007(PDF)
An overview of SBIR's recently completed LFRA product line: commercially known as the MIRAGE XL. The Mirage XL system includes a 1024x1024 IR emitter array. A brief discussion of WFRA which includes an even larger 1536x768 emitter array.
LFRA: Developments in Large-Format Resistive Arrays & Advanced IRSP System Technologies 2006(PDF)
An overview of SBIR's recently completed LFRA product line: commercially known as the MIRAGE XL. The Mirage XL system includes a 1024x1024 IR emitter array.
OASYS:Cryogenically-Optimized Resistive Arrays & IRSP Subsystems for Space-Background IR Simulation 2006 (PDF)
An OASYS technical system status overview.
MIRAGE: Developments in IRSP Systems 2005 (PDF)
This paper describes the growth and expansion of the MIRAGE family.
MIRAGE Update 2003 (PDF)
Overview of SBIR's new emitter foundry, next-generation 512 x 512 development, updated Calibration Radiometry System (CRS) and NUC implementation.
LFRA 2003 (PDF)
Large Format (1024 x 1024) MIRAGE system development status, including RIIC probe test data and next-generation C&CE components.
LFRA 2002 (PDF)
SBIR is producing a 1,024x1,024 Large Format Resistive Array (LFRA) and supporting IR projector system.
MIRAGE Emitter Improvements & Technology Review 2001 (PDF)
SBIR has attained highly stable emitters with MWIR apparent temperatures of 700k.
MIRAGE System Overview and Status 2001 (PDF)
A MIRAGE technical system overview.
MIRAGE Calibration Radiometry System 2000 (PDF)
SBIR's high speed correction algorithm improves the uniformity of the final infrared image.
MIRAGE Large-format emitter arrays 1024x1024 and 1024x2048 2000 (PDF)
A description of the technical approach and plan to develop a new generation of Large Area Infrared Scene Emitters(LAISE).
MIRAGE System Overview and Status 2000 (PDF)
A MIRAGE technical system overview.
MIRAGE Dynamic IR Scene Projector Overview and Status 1999 (PDF)
A MIRAGE technical system overview.
MIRAGE - Innovations in Infrared Scene Simulator Design 1999 (PDF)
A description of the MIRAGE system, and how it addresses the problems of dynamic scene projection.
MIRAGE read-in-integrated-circuit 1999 (PDF)
This paper describes the test results for the MIRAGE read-in-integrated-circuit (RIIC) designed by Indigo Systems Corporation
MIRAGE FAQs 1999 (PDF)
Frequently asked questions about the MIRAGE infrared scene projector.
| @2009 Santa Barbara Infrared, Inc. All rights reserved. | Home | Products | Technical Info | About SBIR | Media Gallery | Contact Us | ||
| Phone: 805-965-3669 Email: sales@sbir.com | |||
 |
SBIR is a preferred supplier to all of the leading manufacturers and integrators of E-O sensors and sensor systems. SBIR continues to expand its’ product line through strategic partnerships with these key organizations, developing the newest test capabilities to support leading edge test requirements as sensor systems increase in sensitivity, resolution, accuracy and performance. |