Features:

UUT Centered Test Development
This simplifies the development of test suites to support complex UUTs and/or detailed test requirements based on stored UUT specifications and test strategies. It is the most far reaching upgrade to IRWindows™ 4 and has some of the most profound impact on test development. The original, Test Centered Development methodologies are still supported and will work in basically the same way (with new interfaces).

Wizards and Templates
UUT Centered Development provides an environment that takes advantage of pre-defined templates for standard test configurations and strategies, plus wizards that assist in creating UUT definitions, Test Configurations, and Test Strategies. Template and wizard examples include the following:

• UUT Device Templates
  • IR Imaging
  • Visible Imaging
  • Laser Rangefinder
  • Laser Designator
• Test Strategy Templates
  • Align and focus
  • Go/No Go
  • Characterization
• Wizards assist
  • UUT Characterizations
  • Test Strategy Implementation
    

Editable Tests
Provides access at the code level for creating new tests and modifying existing test algorithms to satisfy unique test requirements.


Click image to enlarge

Three Modes of Operation
In "Engineering Mode" tests, macros and strategies can be configured and executed interactively by the test engineer.

"Technician Mode" allows test macros that have been predefined by a test engineer to be safely run by a test technician.

"Embedded Mode" allows a system developer to launch tests using a generic DLL interface.

Easy to Use
Using an intuitive graphical user interface, the test engineer can quickly configure and run any of the tests included with IRWindows™ 4. Data collection and analysis is automated and test results can be printed, saved or exported for further analysis.

Complete Test Solution
IRWindows™ 4 operates under Windows XP and is delivered as a complete system that includes a high end PC with a remote interface and video capture card.

Accurate Test Results
Automated testing reduces test time and costs while improving the consistency and accuracy of test results. IRWindows™4 utilizes industry standard test methodologies and analysis techniques to provide the most accurate and complete test system available.

Test Overview:

IR Tests

3D Noise
Auto MRTD
Boresight
Channel Integrity
Continuous Boresight
Continuous MTF
Cross Talk
Distortion
Ensquared Energy
FOV
Gain, Offset, Bad Pixels
Interpolated MTF
Jitter
MDTD
Manual MRTD
MTF
NER, NEI, NEFD, NEP, D*
NETD vs. Background
SiTF
Square Wave response
Spatial Noise (NETD)
Temporal Noise (NETD)
Uniformity

---

Visible Tests

3D Noise
Auto MRC
Boresight
Continuous Boresight
Continuous MTF
Distortion
FOV
Gain, Offset, Bad Pixels
Interpolated MTF
Jitter
MRC
MTF
Noise Equivalent Input
Responsivity
Shades of Gray
Temporal Noise
Uniformity

---

Laser Tests

Beam Divergence
Beam Profile
Boresight
Pulse Energy
Pulse Power
Pulse Width
Pulse Timing
Range Finder Accuracy
Receiver Sensitivity

Specifications:

Please contact SBIR at (805) 965-3669 for minimum PC requirements.

Information subject to change without notice.

PDF Data Sheet:

See PDF Datasheet

Order Information:

Please contact SBIR at (805) 965-3669 to discuss your specific testing requirements.

Information subject to change without notice.